See more Tiling Adhesives
Mapei Fast Set Powder Stone & porcelain adhesive white, White 20kg
This stone & porcelain adhesive white is waterproof and suitable for ceramic, porcelain and natural stone tiles.
- For use on - Plaster, plasterboard, render, screed, concrete, ceramic & porcelain tiles, mosaics & non staining natural stone products
- Recommended for - Wet areas including showers and swimming pools
- With additive for where limited movement is likely e.g. wooden or heated floors
Features and Benefits
- Polymer enhanced
- Soft bed formula for full adhesive contact
- Rapid setting - full foot traffic after 3 hours
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Location||Internal & external|
|Drying time||3 hours|
|Ready to grout||3hours|
|Coverage||Up to 8m²|
chus - 4 years ago
I found this product was to fast for the average diy amature
cartyc - 4 years ago
Not having used Floor Adhesive before I cannot make direct comparisons to other products so treat this as an isolated experience.
I found it easy to mix to the stated proportions but the subsequent paste was difficult to spread and took longer than expected. This meant that the amount i mixed was getting unworkable before i could use it all (I had mixed half the bag).. Setting time was as stated.
Coverage was around 4.5 sq m per bag, possibly because of the waste due to it going off within the stated 30 minutes.
Customers who bought this also browsed
The House Nameplate Company PVC Self Adhesive Business
This business pack B is made from sturdy black and white printed PVC. Simply apply to any internal smooth, flat and dry surface with it's easy self adhesive system. It's 50mm in height and 150mm in width, to make sure it's easily visible. Guarantee - 2 year Comes with - ...
UniBond Ice white Ready mixed grout (W)1.38kg
This 1380g ready mixed grout is on for ceramic tiles & porcelain. Simply apply and leave for 24 hours to dry. Each pack covers 8 m² on average. Guarantee - 1 year Resistance - Waterproof
UniBond Ready to use Wall tile adhesive &
This wall tile adhesive & grout is waterproof and suitable for fully glazed ceramic wall tiles, max size 300 x 300 mm. For use on - Suitably prepared rigid walls Recommended for - Showers, bathrooms and kitchens Heat, water and mould resistant Suitable for splash areas
Unibond Ready to Use Wall Tile Adhesive &
This wall tile adhesive & grout is waterproof and suitable for ceramic and mosaic wall tiles, max sixe 300 x 300 mm. For use on - Suitably prepared rigid walls Recommended for - Bathrooms and kitchens Water, heat and mould resistant Suitable for splash areas