See more Grout
Mapei Flexible Grey Wall & floor Grout, 2.5kg
Product details
Product information
This 2.5kg wall & floor grout in grey is suitable for use with underfloor heating, timber floors, ceramic tiles, concrete, natural stone, plaster, plasterboard, porcelain & timber. Simply apply and leave for 24 hours to dry. Each pack covers up to 8 m² on average.
- 1 year guarantee
- Avoid contact with skin & eyes
Features and benefits
- Pot life 2 hours. For joints up to 6mm
- Domestic & commercial application
- Light use after 24 hours
- Cement based flexible wall & floor grout
- Good wear and abrasion resistance. Water repellent (drop effect)
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
Specifications
| Brand | Mapei |
|---|---|
| Weight (kg) | 2.5kg |
| Pack quantity | 1 |
| Coverage | 8m² |
| Drying time | 24 h |
| Location | Interior & exterior |
| Standard | CG2 |
| Range | Flexible |
| Colour | Grey |
| Product code | 8022452048302 |
Reviews
Colour variations
peterh44 - 4 days ago
When cleaning the tiles of excess grout the colour easily leaches from wiped areas leaving patches of virtually white grout. The tiles are now surrounded by patches of grey and patches of white grout. Looks awful. Now looking for grout stain on a brand new kitchen!
Great product
Yoekshirelad - 2 months ago
No problems whatsoever, great product and when dry turns to a pale grey which is what we wanted. No issues if used and mixed correctly.
Brilliant grout
roseylee78 - 3 months ago
If mixed correctly this grout is easy to use and delivers a great finish. Colour always matches as expected. I suspect a lot of these negative reviews are from not following instructions properly.
Rubbish
Anonymous - 4 months ago
Just crumbles once dry! Very disappointed have to re grout with other stuff
Great grout, good colour match
Bondy63 - 11 months ago
This grout was the exact colour as the sticker on the front of the packet when dry. Mixed in 3 batches, make sure you divide packet evenly if you’re not using it all at once ( I used scales) Packet states to mix/shake packet powder contents before you add water, this is essential to evenly distribute colour pigment which will ensure a consistent colour. Grout is workable for about 40 minutes, so don’t mix more than you can use in that time.