Pack of 12 M10 T nut known as blind nut rivet nut insert nut drive-in nut type of nut

• Guarantee - 1 month
• Fire resistant

Features and benefits

• These are the standard retained nuts and fittings in common use on UK manufactured furniture with screw-in legs. Question please feel free to email or call 0744 955 6781 Mon-Fri 9am-4pm
• T-NUT USED WHEN FURNITURE IS NOT MADE ALREADY AND FITTED INSIDE AT THE TOP OF THE FRAME THEN FEET SCREWIN CLAMPING THE SPIKES IN TO FRAME.
• A T-nut, T nut, or tee nut (also known as a blind nut, which can however also refer to a rivet nut or an insert nut, and likewise drive-in nut) is a type of nut used to fasten a wood, particle or composite materials workpiece, leaving a flush surface.
• We have over 30 different colour possibilities with different finishes these include washed stained and solid colours. If you're unable to see the colour you want please send us a message or give us a call 0744 955 6781. These legs are great for any furniture including sofas chairs settee's beds footstools cabinets tables bookcases draws Furniture legs come with different fittings. Some have bolts which can come in 2 sizes M8 8mm M10 10mm and others are self-fixing pre-drilled which fit to your furniture with 6mm wood screws. You will need to know the fittings you require. We can usually cater for most fittings depending on the foot or leg you choose. To ensure you order the correct bolt size you will need to check the bolt size on your existing legs. You are unable to do this with a tape measure as this will not accurately allow for the thread. The only way to be sure is to try a nut on the existing legs. If you try an 8mm nut and it fits you know its M8 if it’s too small you require M10. If you need any advice or help with which fittings to order please send us a message or give us a call on 0744 955 6781. We can usually suggest a type of fitting that will work for your requirements.