See more Elbows
Plumbsure Push-fit 90° Pipe elbow (Dia)15mm
Features and benefits
Our Plumbsure Copper Push Fit range makes jointing easier, faster and more cost effective than other jointing methods - a fittings system which simply pushes together in seconds to create a perfect joint, every time.
- Improved installation time over traditional methods
- Perfectly clean internal bore (less finishing/cleaning required)
- No localised annealing from high temperature working
- No carbon deposits (less risk of corrosion)
- System does not need to be ‘dry’ for effective jointing
|A size (imperial)||0.59"|
|B size (imperial)||0.59"|
Solb4u - 9 months ago
Felt I needed to add this review because previous reviews unfair. If you use these in the correct way and clean the pipe with wire wool before seating they work first time every time. Beware though, do not use these with plastic pipe, use copper pipe which has been cut using a pipe cutter and then clean with wire wool prior to push fitting. You won’t be disappointed. I only used to solder until I found these and now I swear by them
Anonymous - 10 months ago
Used two to fit a bathroom wash basin and both leaked as soon as the water was switched on. Waste of time. Wished now I’d done it with some proper joints, a blowtorch and solder.
Work great - if pipe is properly prepared.
JonGD - 1 year ago
First time I used these it leaked but once you learn to prepare pipe correctly they work great and are so quick.
Make sure the pipe end has a lead-in (auto cutter helps), the end is burr-free, polish with fine wire wool and push in nice and square. Job done!
Answer the question - 1 year ago
It says demountable, so How do I remove the thing.
kevin1866 - 2 years ago
Bought a number of these fittings today and when I put water back in the system one of them leaked. It was impossible to stop it leaking or get it back off the pipe. Cost me the rest of the day to sort it out.