See more SDS Drill Bits & Chisels
PTX SDS Plus drill bit (Dia)25mm (L)450mm
Ideal for drilling brick, block, masonry, concrete and granite this SDS plus drill bit is compatible with SDS plus drills with Roto-Stop. It is constructed from 40cr steel.
Features and Benefits
|Surface finish||Sand blasted|
|Cutting length (mm)||450mm|
|Fitting type||SDS plus|
|Blade tip type||Tungsten carbide tipped|
Great to drill on a brick wall.
Rolando - 1 year ago
I bought this drill bit costing £10 to do a job in my flat for which not only I was quoted £220 but they never turned out to do it. It worked well with my Ryobi SDS batery operated drill
Masonry drill bit
Anonymous - 1 year ago
I looked all over the store at Stirling I saw a lot of drill bits in the sale ranging from £5 upwards but couldn't find one this size enentually I found the large bit in a basket I was a little shocked to see the price I needed the bit for a job on my greenhouse.So disputed price I bought it.When I got home I did the job.i was annoyed to get a message about price reductions on products over £25 the drill bit did its job but made the work expensive.
Did the job perfectly!
FireplaceDriller - 2 years ago
We have recently moved into a new home, and it has a lovely fireplace, so we decided to buy a nice electric fire (also from B&Q) that now sits in the fireplace, looking mighty grand! However, we had to run the power cable out of the front of the fireplace and into an extension cable, which didn't look grand, so I decided to drill through the side of the fireplace to put the cable through. Bearing in mind, we are talking about 3 bricks deep, it was obvious that my existing drill bits were not going to cut the mustard (whatever that means) so I measured up, popped along to B&Q, bought the right size drill bit, came home and drilled through the fireplace! Easy peasy, lemon squeezy, and before too long, the fire was working and there were no cables in sight! Perfect. Thank you B&Q, for the drill bit and for the fire.
SDS Masonry drill
Acme construction - 2 years ago
Old drill blunt! Di8dn't realise how much so until I tried this new one. Went through double brick wall easily.
Customers who bought this also browsed
Bosch SDS Plus-5 Drill Bit (Dia)7mm (L)210mm 7
Compatible with rotary hammers with sds-plus holder, this 7mm sds plus-5 drill bit is made from tungsten carbide and is great for drilling masonry, concrete and reinforced concrete. 4-flute design gives fast dust removal for higher drilling speed and less wear Entering tip for active and accurate centring in ...
Bosch SDS Plus Drill Bit (Dia)12mm (L)210mm 12
Compatible with rotary hammers with sds-plus holder, this 12mm sds plus drill bit is made from tungsten carbide and is great for drilling masonry, concrete and reinforced concrete. 4-flute design gives fast dust removal for higher drilling speed and less wear Entering tip for active and accurate centring in ...
Erbauer Masonry drill bit (Dia)20mm (L)450mm
Ideal for masonry, concrete and brick this masonry drill bit is compatible with SDS plus hammer drill. It is constructed from steel. Hardened steel alloy shank with ground tungsten carbide cross tip for clean and accurate holes in stone and concrete It can be applied with most tools including Bosch, ...
Universal Masonry drill bit (Dia)16mm (L)400mm
This 16mm masonry drill bit is made from steel and is great for all masonry drilling. Tungsten carbide tip for drilling into plaster and concrete It can be applied with most tools including Bosch, Erbauer, Titan and Fein