QUALITY F Type Connector Hex Crimping Tool Aerial Coaxial Crimper CT100 RG6 Sky

Professional Standard

F-Connector Hex Crimp Tool

Used

for - This is an essential tool for anyone needing to crimp or fit F-Type hex connectors

such as. They would usually be applied to CT/WF100, CT/WF125 & CT/WF165

cable but this will also be OK with RG6 cable. In fact, our crimping

tool will crimp onto most (not all) types of coaxial cable.

Sizes on crimp tool (smallest to largest)CT/WF100 & RG6 – Coaxial cable with an outer diameter of 6-7mm (approx.) and relevant F-connectors. When closed completely, the jaw size is 8.2mm.CT/WF125 – Coaxial cable with an outer diameter of 7-8mm (approx.) and relevant F-connectors. When closed completely, the jaw size is 9.5mm.CT/WF165 & RG11 – Coaxial cable with an outer diameter of 9-10mm (approx.) and relevant F-connectors. When closed completely, the jaw size is 11.2mm.

Useful

Features – Our high quality, professional crimp tool is extremely easy to use, a

comfortable hand grip has also been installed to avoid causing any discomfort

after extended use. The crimp tool is built to a very high standard and is

built to last.

Directions – You will need to strip the PVC outer layer without damaging the core inside, you can do this with one of our cable strippers but if you are confident with a pair of snips/pliers, you can strip the outer layer away with either of those. When using our F-Connector hex crimp plugs, cut all of the way through the cable leaving only the central core untouched. There is a rubber/plastic “O” ring inside of the connector that will go around the outer PVC layer of your cable. A metal ring inside of the connector will go under this outer layer of PVC making contact with the braid (shield) beneath. You should also ensure that you have stripped enough of the cable for the copper conductor to poke out of the top of the connector, this can be trimmed at a later stage if it is too long but around 10mm will be sufficient. If you have your own connectors, please follow the instructions for that partic