See more Laminate flooring
Ravensdale Natural Oak effect Laminate flooring, 1.48m² Pack
- Suitable for Any room, excluding wet-rooms
- Click system
- Suitable for use with underfloor heating systems up to 28 degrees
- 20 years guarantee
Features and benefits
- Easy to clean
- Quick and easy to install
|Base material||High density fibreboard (HDF)|
|Top layer thickness||0.3mm|
|Underlay type required||Foam, polystyrene or wood fibre|
|CE marked||CE marked|
|Made in||Great Britain|
If you want sleepless nights! buy this
Laminhater - 29 days ago
Unless your floor is 100% level this floor will fail. Doesn't click together as stated. The end sections do not lock in but simply lay on top of the previous board. Impossible to stop movement of boards when walking on them. Have had to take up large sections of the floor to try to rectify, but impossible to put right. The worst flooring ever. I've 50 packs of this floor to take up and try and return.
Didn’t even last 2 weeks!!!!!
J1912 - 5 months ago
I got this flooring to match hard wood flooring that we have in our lounge. It got professionally fitted by a highly recommended joiner. He’s done work throughout our home and used by my whole family. He had no bother laying it- it was stopping the boards popping he had issues with. Although this product isn’t fit for areas that would be subject to water, I feel like because of the popping of the boards the even slightest bit of water I.e a steam mop the water is getting into the boards and damaging the boards which have popped. Would not recommend this flooring at all.
This product is good value
Ice Gem - 5 months ago
I brought for downstairs. I personally didn't fit it. No complaints when being fitted. Buying more for upstairs. Good value. Looks natural
This product is great
Oljka - 5 months ago
Bought couple month ago and really happy with quality.Put underneath diall 5mm boards and can say very good quality.
Brilliant Value work perfectly
Paisley Paul - 6 months ago
I read the reviews with some trepidation after I had bought this product. I had no problems with this at all my best tips are as follows (though maybe this applies to all flooring).
1. Check the boards for straightness I had a few which were curved either take them back or use them for cut boards.
2. Run the tip of an electrical screw driver down all the joints to catch any whiskers or slivers if you don't they may stop your boards from clicking together.
3.Make sure you pull the tongue good and hard into the groove it can pop out and then your flooring will start to run out.
On the whole this was a easy to use product and looks good I can't comment on the wear or waterproofness yet. I am thinking of buying it again.