See more Floor Paint & Treatments
Ronseal Natural Soft sheen Floor oil 2.5L
You can apply this floor oil from Ronseal to , using a brush, to provide protection. It takes 30 minutes to dry and will cover up to 16 m² per litre on average.
- Nourishes & protects wooden floors, bringing out the natural beauty of wood
- Protects against water spills
- Wear resistant
Features and Benefits
If you want a product that nourishes your wooden floor whilst protecting it, look no further this floor oil is perfect. It soaks into the wood to bring out its natural beauty and protects it from water spillage.
- Dries in just 30 minutes
- Water resistant
- Beautiful natural sheen finish
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Coverage||Up to 16 m² per litre|
|Drying time||30 minutes|
|Recoat time||30 minutes|
|Touch dry time||30 minutes|
|VOC description||Very high|
Care when using on already oiled floor
Gregnut - 1 year ago
I used this product to maintain an oak floor which had previously been treated with a traditional 'Danish' Oil (Woca Oil). The Ronseal product produces a sheen finish, whereas the Danish oil is a matt finish. After the first coat, the result was very patchy, with shiny areas and matt areas. A second coat improved this, and it could probably do with a third coat to achieve an overall sheen. If you have previously used Danish oil, it's probably best to use the same oil when maintaining it.
The Ronseal has a big advantage in that it dries very quickly, in less than an hour, which helps a lot with a room that is in constant use - Danish oil takes at least 12 hours to dry.
A couple of hints - when using as a maintenance oil, don't wait 15 minutes before wiping off the excess oil, as it says on the tin, do it straight away, as it becomes tacky very quickly. And make sure you have plenty of cloths to wipe off the excess- the cloths very quickly become saturated and don't work to remove the excess oil, which is important to achieve a smooth finish.
Apply with mop
Dohanut - 1 year ago
I have applied this to my solid oak floor about 5 times now. It doesn't darken my wood. Takes much longer to dry maybe 6 hours. I do it before bed! I apply it with one of those giant flat mops after brushing it then cleaning it then mopping with meths. I sprinkle and mop. I may waste a little and you need to be careful to go back and forth over an area at a time.
A lovely waterproof seal which can be a little slippy to start with.
Got to get all the dirt and hair or it will be immortalised but once dry a little fine sanding and a precision brush pretty much cures it.
Product isn’t what it says on the tin.
Garzi - 1 year ago
This is a varnish with a distinctive red tinge.
trial is a must!!! it made our oak floors very dark red and glossy.
D1sappointedDIYer - 1 year ago
This does not do what it says on the tin. The oil is not clear and turned our newly sanded floorboards a much darker, orangey colour after just one coat. Returned for a refund.
Great for OSB floor
Zebbtab - 1 year ago
Easy to apply with pain pad to an OSB floor. Quick drying. Will use again.
Customers who bought this also browsed
Colron Clear Danish oil 0.5L
You can apply this clear danish oil from Colron to , using a brush or cloth, to provide protection. It takes 6 hours to dry. Replaces the natural oil in wood Protects against warping, cracking & splitting Produces a durable, water resistant finish
Ronseal Diamond Cream Satin Floor paint2.5L
A washable, cream floor paint in a satin finish. Covers up to 12 m² per litre and dries in 72 hours. Protects against knocks, scuffs, scrapes & spills Resists flaking, peeling & chipping Suitable for bare or previously painted floors Recommended for multi surface
Ronseal Diamond hard Antique pine Satin Floor varnish
This antique pine floor varnish from the Ronseal Diamond range can be applied to interior using a brush. The varnish dries in just 30 minutes and will cover up to 18 m² per litre on average. Non-yellowing so you won't need to reapply as often Quick drying in just 30 ...
Ronseal Diamond hard Clear Satin Floor varnish 2.5L
This clear floor varnish from the Ronseal Diamond range can be applied to interior using a brush or roller. The varnish dries in just 30 minutes and will cover up to 18 m² per litre on average. Non-yellowing so you won't need to reapply as often Quick drying in just ...