See more Multi Surface Paint

Home

Right chevron

Multi Surface Paint

Right chevron

Ronseal Pure brilliant white Satin Wood & metal paint 0.75L

£12
£16 per L
Loading
Checking availability...
Loading
Checking availability...

Our stores do not stock this product

Product Details

Product Information

This Pure brilliant white satin wood & metal paint has been specially designed to give a durable and long-lasting finish on a range of surfaces. Simply apply with a brush and leave for 4 hours to dry - a great way to give the surfaces additional protection. Covers up to 7m² per litre on average.

    Features and Benefits

    At B&Q we want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up so you are sure that this is the right colour for you.

    • Use with Ronseal Knot Block Primer & Undercoat for Stays White Forever Guarantee
    • Stays White

    Health and Safety

    Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.

    Specifications

    BrandRonseal
    Colour descriptionPure brilliant white
    Surface finishSatin
    Litre capacity (L)0.75L
    Drying time4 hours
    Recoat time4 hours
    CoverageUp to 7m² per litre
    VOC descriptionLow
    Paint/Stain/Varnish baseWater based
    LocationInterior & exterior
    Paint typePaint
    Colour groupWhite
    Product code5010214875245

    Reviews

    Full star
    Empty star
    Empty star
    Empty star
    Empty star
    1 / 5(2 reviews)

    Does not live up to the name "gloss"!!

    Full star
    Empty star
    Empty star
    Empty star
    Empty star

    PJM_001 - 5 months ago

    I correctly sanded the skirting boards, windows, and doors before applying undercoat - all went well until this "gloss" was used - it is very thin, only seems to want to stick to the brush and results in a very rough, scratchy finish. After two coats (benefit of doubt) I had to sand everything down and use a different gloss which came out brilliant first time.

    4 coats to cover

    Full star
    Empty star
    Empty star
    Empty star
    Empty star

    DIY Hen - 2 years ago

    I used this on top of 2 coats of ronseal primer undercoat and even after 4 coats it is far from perfect. It is very thin and in my opinion hard to apply.