See more Plumbing Spanners, Tap & Waste Tools
Rothenberger Immersion heater Spanner
Our stores do not stock this product
|Material||Chrome vanadium steel|
|Spanner type||Immersion heater|
BB75 - 6 years ago
must have tool for changing your Immersion Heater. works a treat. tap it in place, slide in the rod, and give it a tap with a hammer to get it going.
Bar needs improving
Bejyes - 7 years ago
The box spanner is ok and very robust however the bar used with it bent on the first use. A lot of heat was required to get the old immersion heater to move without bending the bar beyond use. A stiffer and stringer bar would be better - one that can take a bit of leverage with a tube.
Did the trick
chazzyf - 9 years ago
After using several conventional immersion heater spanners with little success I went out and bought this. Took about 2 minutes to setup and apply a few knocks with a hammer to losen the installed element, followed by a straight forward removal of the unit once the tank had been drained. Perfect for the job!