Rotur Cigar Pen Kit Gold with clip and threaded cap - Black Ink

The Rotur Cigar pen kit is a stylish and weighty pen. Black accents above the nib and centre ring section set apart the colour of your pen blank. With a simple turn, the twist mechanism smoothly extends and retracts the refill. The kit is designed to turn on the Rotur pen mandrels. Gold plated 24ct and Chrome versions are available.

Prepare the pen blank by drilling a 10mm hole with the Rotur TDHSS10SET.  This drill set includes a 9.8, 9.9, and 10mm drill because in softer timbers the hole drilled can end up being too big for the brass tube. By starting with the 9.8mm drill, you ensure a good fit with the brass tube and don't risk wasting blanks.

After gluing the brass tubes in place, trim the excess timber at both ends of the tube by using the 9.1mm trimming tool shaft (PBTS0910) with the 25mm Trimming tool head (PBT25).  Then use the Rotur Cigar bushing kit (CIGBKIT) to support the blank on the pen mandrel.

Gold Pen Kit: CIGP1