Rustins Metal Lacquer - Metal Renovator - 125ml

• Metal Lacquer
• Suitable for Metal
• Surface Preparation - Surface must be clean and free from all traces of wax, grease and metal polish. Lightly tarnished surfaces should be cleaned with a good quality metal polish, which must then be removed with warm soapy water. If the surface is not smooth, a nail brush should be used to ensure there is no polish left in the crevices. The article should then be dried with a cloth.
• Instructions for Use - The lacquer should be applied quickly and evenly with a soft brush. The lacquer can be applied by spray and due to its low viscosity it is not normally necessary to thin. If thinning is necessary, Rustins Cellulose Thinners can be used. If possible objects such as letterboxes should be removed from the door so that at least one coat of lacquer can be applied to the edges of the reverse side. The lacquer is best applied in dry warm weather as dampness can sometimes result in ‘blushing’ of the surface which results in a milky finish.
• Guarantee - Statutory

Features and benefits

Low solid lacquer based on a polymethacrylic ester.

A clear colourless film for application to brass, copper, bronze and silver to prevent discolouration caused by oxidisation and tarnishing.

Does not craze or yellow with age.

• A Clear lacquer that does not yellow or craze
• Excellent Adhesion
• UV Protection
• No more Cleaning
• Clear & Quick Drying
• Height:122mm
• Width:47mm
• Depth:48mm