Rustins Quick Dry Varnish - Pine 1ltr

• Guarantee - Statutory
• Suitable for Wood
• Instructions for Use - Stir well before use. Apply liberally across the grain using a synthetic fibre brush specially made for water?based finishes. Finish off by brushing lightly with the grain, taking care not to over-coat. The first coat may be thinned with up to 10% water in very warm conditions. If the first coat raises the grain, sand lightly with fine abrasive paper before applying a further coat. The varnish will be touch-dry in approximately 20 minutes, depending on temperature and humidity. Further coats should be appplied after a minimum of 2 hours.
• Surface Preparation - Surfaces must be clean and previous coatings should be removed with Rustin’s Strypit Paint and Varnish Stripper. It is advisable to clean old surfaces with White Spirit to remove any wax or contamination, wipe away the solution formed with clean kitchen paper towels. Bare wood may be dyed with either Rustin’s Wood Dye before varnishing.
• Long lasting wood protection

Features and benefits

Low odour, quick-drying, non-yellowing on ageing. Touch dry in 30 minutes. Long Lasting wood protection. For all types of interior wood nterior, bare woodwork, cork, hardboard. Can also be used as a sealer for concrete, brickwork and plaster. Conforms to Safety of Toys Regulations BS EN 71 Part 3 2019. Clean brushes in water. Made in the UK.

• For all types of interior wood
• Waterbased & quick drying, Satin Finish
• For Interior Use
• Toy Safe & Food Safe
• Tough & Durable
• Toy Safe & Food Safe