See more Cladding


Right chevron

Timber & Joinery

Right chevron


Right chevron
Spruce Tongue & groove Cladding (L)3m (W)119mm (T)14.5mm

Spruce Tongue & groove Cladding (L)3m (W)119mm (T)14.5mm

Sold & shipped by B&Q

Checking availability...

Product details

Product information

    Tongue and groove cladding can be fixed in either a vertical or horizontal position. When installing vertically start the project in one corner of the room with the groove side of the board facing the adjoining wall. Cladding can be adhered to a smooth surface or stud work or fixed to timber battens. Cladding can be face fixed or secret fixed by nailing through the base of the tongue at an angle into the stud, wall or batten. When fitting the last board this may need to be trimmed to fit by removing a section from the tongue side of the cladding. If a tight fit the under section of the groove of the cladding can be cut away so the board fits neatly on the tongue of the previous board. This must be glued or face fixed. When fitting cladding in a horizontal position begin with the lowest cladding board at the bottom of the project with the groove nearest the ground, this can also be fixed onto the surface by nailing at an angle through the base of the tongue. Work upwards and complete the project with the last board being cut to fit if necessary.

    • Seal cut edges with a suitable treatment when used externally

    Features and benefits

    • Precision finished
    • Preservative treated
    • Slow grown & kiln dried to make it more stable & easier to work with
    • Made from responsibly sourced, Forest Friendly timber
    • Precision finished


    Pack quantity1
    Product width119mm
    Product weight3919g
    Product thickness14.5mm
    Product length3000mm
    Colour groupNatural
    Product code5397007203080