Stanley FatMax Steel 300mm PVC/Plastic Saw
[This is a block of tabs..]
Polyvinyl chloride (PVC) & plastic, this 300mm pvc/plastic saw from Stanley FatMax has been designed to give a fine cut cut finish, and comes with 11 teeth per inch (TPI).
Features and Benefits
- Un-set teeth create less burrs when cutting
- Long lasting cutting life with a clean fine cut. Easy to control
- 1mm blade thickness for increased accuracy of cut
- Handle marked with 45° and 90° angle guide
|Blade length (mm)||300mm|
|Teeth per inch (TPI)||11|
Help & Advice
How to guides
What are planning and building controls? Why do they exist? Can you deal with them yourself or is it best to ask a specialist? As with any task, you can decide for yourself when you know exactly what's involved.
First of all, it's important to understand what planning and building regulations are. It's easy to think of them as restrictive, bureaucratic tools put in place purely to thwart your ambitions. However, they're essential safety mechanisms which have been designed to protect you, your neighbours and the local environment.
The regulatory bodies will give you permission to carry out your plans unless there are very good reasons not to - in which case they must explain their decision. And if you disagree, you have the right to appeal against it.
Do you know your hacksaw from your hammer? What about bradawls, cross-peins and strap wrenches? There's a whole catalogue of hand tools available and if you're going to do a job correctly, make sure you get the right ones.
Choose a convenient delivery date on 1000s of products
45 day returns policy
Arrange collection or return to store.Customer support team - 0333 014 3357
Free delivery on standard orders over £50
Excludes Large and Bulk delivery
This steel (c75) 550mm high quality c75 steel blade universal panel saw from Irwin Jack is ideal for general purpose use, and is used with a push & pull cut direction. The triple ground teeth make short work of the material you need to cut down to size. It comes ...
With seven teeth per inch, this steel 550mm high quality c75 steel blade panel saw from Irwin is specifically designed for domestic and trade use, gives a fine cut, and is used with a push & pull cut direction. The triple ground teeth make short work of the material you ...
With 12 teeth per inch, this steel 350mm induction hardened steel blade tenon saw 12tpi from Magnusson is specifically designed for domestic and trade use, and is used with a push & pull cut direction. It comes with an ergonomically designed, bi-material handle so you can work for a prolonged ...