Stonecare4U - Tile And Grout Sealer Spray (600ml) - Suitable For Walls & Floors, Grout & Tiles - Fast Drying VOC Compliant Formula

• 3 months guarantee

Features and benefits

Make sure the area is well ventilated before application and certainly ensure you are wearing personal safety wear including gloves, eye protection and a suitable vapour mask

.

After that, make sure that the surface is thoroughly clean and free from waxes, sealants, or coatings of any kind.

Next, shake the can well and spray Essential Tile and Grout Sealer Spray 25-40cm from the surface. Apply the product evenly, wiping off any excess if spraying onto vertical areas.

To sum up, allow the product to dry for 1-2 hours and test an area after application using water droplets. If the droplets don’t bead on the surface but are absorbed, a second or third coat may be necessary to attain the desired performance.

• Stonecare4U Tile and Grout Sealer Spray works on both walls & floors, grout & tiles and can be applied immediately after grouting.
• Stonecare4U Tile and Grout Sealer Spray is expected to wear for up to 20 yrs This will vary depending on the type of surface, wear and proper maintenance.
• Our fast-drying formula offers instant protection against stains and does not change surface appearance.
• Up to 15m² per 600 ml container
• Surfaces that are not to be sealed must be protected with masking material. Above all, do not apply sealer onto acrylic or stained surfaces, such as cabinets, as this may cause discolouration.
• Subsequently, you can clean treated areas with water and a pH-neutral cleaner. Certainly, do not use harsh or abrasive cleaning agents on treated surfaces.