See more Shower pumps
Stuart Turner 1.5 Bar Twin Impeller Shower Pump Techflow ST + Pair Hoses
Sold & shipped by Buyaparcel
Available online only and not stocked in B&Q stores
Product details
Product information
Showermate TP Standard 1.5 bar Twin Shower Pump. Designed to boost the hot cold water supply to an individual shower, bath, shower mixer or mixer tap. Suitable for positive head applications only.
Performance
Maximum head - closed valve1.5 bar / 15 metres
Performance @ 9 l/min1.0 bar
Performance @ 18 l/min0.7 bar
Maximum flow32 l/min
Maximum static inlet pressure10 metres
Maximum working pressure*300 kPa / 3.0 bar
Maximum ambient air temperature40 �C
Min / Max water temperature**Min 4 �C / Max 65 �C
Flow switch sensitivity0.8 l/min (approx)
The UK's Quietest Shower Pumps
Actual comparative tests under laboratory conditions confirm that Stuart Turner manufactures the quietest peripheral (regenerative) shower pump available.
Continuously Rated Motor
Continuously rated shower pumps effectively run until the user turns it off. This is particularly good in a family home where the shower needs to be used frequently throughout the morning or evening.
A pump that isn't continuously rated will turn itself off to allow the pump to cool, potentially causing issues with water pressure to the shower.
Positive Head
A positive head shower pump is designed to be gravity fed, therefore it needs a 'head' of distance (at least a metre) between the pump and the bottom of the cold water cistern.
Flexible hoses included
This shower pump comes complete with four flexible hoses, which are used to link your shower pump to both incoming and outgoing water pipes.
These flexible hoses are anti-vibration which means the hoses are less prone to vibration from the pump, helping to reduce noise and prevent damage to the pump itself.The gravity feed 'kick-starts' the pump, pushing water straight through to your shower.
- Statutory guarantee
Features and benefits
1.5 bar pressure Suitable for positive head applications High quality entry level plastic pump supplied with 15 mm flexible hoses Quiet operation WRAS approved product Intermittently rated Anti-vibration feet EPDM/Carbon/Al.Oxide seal Pre-wired with 1.5 metre power cable 1 year warranty Performance Maximum head - closed valve1.5 bar / 15 metres Performance @ 9 l/min1.0 bar Performance @ 18 l/min0.7 bar Maximum flow32 l/min Maximum static inlet pressure10 metres Maximum working pressure*300 kPa / 3.0 bar Maximum ambient air temperature40 �C Min / Max water temperature**Min 4 �C / Max 65 �C Flow switch sensitivity0.8 l/min (approx) Connections Pump connections (Inlet)G � M Pump connections (Outlet)G � M Flexible hoses Connections (Inlet)G � female x 15 mm push-in x 185 mm long Connections (outlet)G � female x 15 mm push-in x 175 mm long Physical Enclosure protectionIPX2 Length250 mm Width97 mm Height - excluding hoses152 mm Weight - including fittings2.6 Kg
- 1.5 bar pressure
- Suitable for positive head applications
- High quality entry level plastic pump supplied with 15 mm flexible hoses
- Quiet operation
- WRAS approved product
- Intermittently rated
- Anti-vibration feet
- EPDM/Carbon/Al.Oxide seal
Specifications
Product height | 1mm |
---|---|
Product length | 1mm |
Product weight | 1kg |
Product width | 1mm |
IP rating | IP44 |
Water regulations | WRAS approved |
Product code | 5050400490845 |