Terma MOA 120W Chrome Thermostat temperature control Heating element

Product information

This Terma MOA heating element gives you full control of a Terma Towel rail. With 5 heat settings from 30°c to 60°c to regulate the internal radiator temp, denoted by 5 LEDs.

• Guarantee - 2 years
• CE marked
• Comes with 1x Heating Element with Control Head
• Overheat cut out protection

Features and benefits

• The Terma MOA Element has 5 heat settings from 30°c to 60°c regulating the internal radiator temp, denoted by 5 LEDs.
• No Timer. 2hr drying function. Compatible with external Timer as remembers settings when off.
• 66mm length from thread down. 55mm diameter clock shaped face. 315mm internal probe length.
• Has 4x buttons that control Temp +/-, Dryer, Power with frost and overheating protection
• Straight cable, no plug. IPx5 (safe for use in a bathroom) Class 1
• To correctly choose the right wattage of element for your towel rail or radiator, look at the output of the chosen radiator as central heating (hydronic) in watts and choose an element with the wattage closest to that figure. If the output of the chosen radiator is only listed in BTUs, the conversion formula is BTUS / 3.41 = Watts
• When making the decision to electrify any towel rail or radiator it is important to check with the manufacturer of that model that it is suitable to work with a heating element. Not all towel rails or radiators are suitable dependant on their design and how the heat will cycle internally around the rail, so avoid electrifying certain models as they won't work and this will not be the fault of the element
• If you are buying a heating element to convert a towel rail for use as dual fuel (electric in the summer and central heating in the winter) regularly bleed the towel rail, as on a central heating system air can build up inside. A heating element should never be run in the open air as this could potentially cause the surface of the rail to get extremely hot and burn your towels.