See more Tiling Adhesives
UniBond Ready to use Wall tile adhesive, Beige 7.4kg
This wall tile adhesive is waterproof and suitable for ceramic wall tiles, max size 300 x 300 mm.
- Recommended for - Bathrooms and kitchens
- Water resistant
- Suitable for splash areas
Features and Benefits
- Instant grab to prevent tiles slipping
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Drying time||24 hours|
|Ready to grout||24hours|
Awful adhesive doesn’t work
NRG FOXTROT - 7 months ago
As with other comments it doesn’t adhere to the tile and tiles fall off. It seems to not dry despite being on the wall for a week. Difficult to use as well.
All tiles fell off 4hrs after installation
Plumberedin - 7 months ago
Worst grout ever used, all tiles fell off. Had to replace box of tiles and strip wall back. Extra 2 days on the job
stuck on you
crombie - 8 months ago
It seems to have done what it's supposed to do. The decorator who used the product had no complaints with the product.
Sticky micky - 1 year ago
Started tiling with this stuff, went back to first tile after half an hour to find it was loose and came off the wall in my hand, and i found there was no adhesive stuck to the back of the tile,
It's as if it had formed 'a skin' before the tile had been pushed on the the wall
(N.B working time is 1/2 an hour - tile was fitted within seconds of adhesive being applied)
Had to remove all tiles and scrape this stuff off the wall, i took it back to B&Q and was told it is a faulty batch that they new about and they had cleared their shelves of the faulty ones, so I swapped it for a new one outside of that faulty production date,
Started tiling the same wall only to find exactly the same thing happened again, took it back and bought some of there 'Diall' adhesive which has worked perfectly fine!!
Wasted hours of my time on an otherwise trusted branded name - feel really let down by unibond and B&Q for still stocking this rubbish!!
##From reading these reviews it's clear this has been a problem for quite some time and is not just a faulty batch!##
Doesnt wor!k dont get this!
Paulworth - 2 years ago
Don't use this product it doesn't work. Left the tiles for over 3 days many of them still came off the wall. adhesive was still wet. Use a quality powder product it might cost more but you only have to do it once.
Mapei Powder Mosaic Tile Adhesive, White 5kg
This mosaic tile adhesive is waterproof and suitable for ceramic, glass, natural stone & porcelain. For use on - Concrete, plaster, plasterboard, plywood & cement boards Recommended for - Kitchens, bathrooms & wetrooms Frost, water & heat resistant Flexible for where limited movement is likely e.g. ...
NX Universal Powder Wall & floor tile adhesive,
This high polymer modified cement based adhesive is waterproof and suitable for suitable for walls & floors. For use on - Ceramic, porelain & stone Recommended for - Walls & floors Slip resistant Flexible for where limited movement is likely e.g. wooden or heated floors Suitable for splash areas and ...
UniBond Beige Ready mixed grout (W)3.75kg
This 3750g ready mixed grout is suitable for use with underflooring heating on for ceramic tiles & porcelain. Simply apply and leave for 24 hours to dry. Each pack covers 8 m² on average. Guarantee - 20 years Resistance - Waterproof
UniBond Ice white Ready mixed grout (W)1.38kg
This 1380g ready mixed grout is on for ceramic tiles & porcelain. Simply apply and leave for 24 hours to dry. Each pack covers 8 m² on average. Guarantee - 1 year Resistance - Waterproof