See more Wall & ceiling paint


Right chevron

Valspar Simplicity Wall & ceiling Matt Emulsion, Base C, 2.5L

Sold & shipped by B&Q

Left chevron
Valspar Simplicity Wall & ceiling Matt Emulsion, Base C, 2.5L
Right chevron
Was £20
Save £4
£6.40 per L

Size option

Previous arrow

Product details

Product information

  • Suitable for Drywall & plasterboard
  • Not stain resistant
  • Surface Preparation - Apply when the temperature of the surface being painted is above 10°C. Glossy surfaces should be deglossed before painting. Repair all damaged areas before painting. Remove old, loose or flaky paint. New, fresh plaster must be sealed with Valspar® Interior Primer & Undercoat prior to painting. Other bare, absorbent surfaces must be sealed with primer or a first coat of this product prior to applying the finishing coat. The surface must be clean, dry and free of dust and grease.
  • For indoor use only. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°C. Stir contents to ensure paint is thoroughly mixed. Purchase enough paint to complete the job. When purchasing more than one container of the same colour, intermix containers to ensure colour uniformity. If you feel that you may run out of paint, stop at a corner or a natural break. Apply 1–2 coats using a suitable brush, roller or sprayer. Apply liberally, working from dry areas into the paint’s wet edge and finish with gentle, vertical strokes. Avoid excessive rolling or brushing. Extra coats may be required when making dramatic colour changes. Do not thin this product. Dries to the touch in about 1 hour under normal conditions. Allow 2-4 hours between coats.

Features and benefits

Lightweight, easy to use and wipeable formula. Stunningly simple. Valspar® Simplicity Walls & Ceilings is an easy to use emulsion available in up to 2.2 million colours! This low splatter paint is quick drying with a smooth finish, giving a great, even coverage. It’s also lightweight meaning you can achieve your new look with minimal effort, whilst being wipeable and easy to maintain. Valspar Simplicity’s water-based formula means it’s both easy to use and to clean up, so you can spend more time enjoying your transformation.

  • Lightweight formula
  • Wipeable
  • Everyday Durability
  • Splatter Resistant
  • Maximum Coverage
  • Pure Colour HD Light Refracting Quality
  • This product has a Valspar Love Your Colour Guarantee
  • We want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up, so you are sure that this is the right colour for you.
  • We’re unable to offer refunds or to exchange products that have been mixed to your individual requirements. If the product you purchase is faulty, or not as described, we may offer an exchange, refund or repair as appropriate. This does not affect your legal rights.


Application methodBrush, roller or spray
Drying time2 h
Instructions for storageStore in a cool, dry place avoiding damp areas and extreme temperatures.
Maximum application temperature40°C
Minimum application temperature10°C
Minimum touch dry time1h
Paint base densityDeep base
Recoat time2-4 hours
VOC levelMinimal
Product code5055018186982