See more Primers & Undercoats
Valspar Trade White Metal & wood Primer & undercoat, 1L
Our stores do not stock this product
Apply this primer & undercoat from Dulux Trade to interior & exterior, using a brush, to prepare the surface for painting. It takes 1 hour to dry and will cover 10 m² per litre on average.
- Suitable for Metal & wood
Features and benefits
- Excellent Coverage
- Ensures optimal performance of top coat
- No Splatter
Health and safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Location||Interior & exterior|
|Litre capacity (ml)||1000ml|
|Drying time||1 h|
|Recoat time||2-4 hours|
TracyBe - 9 months ago
Advised by member of staff to use this product as was using the same make top paint. Went on like milk with a very toxic odour. Still hadnt dried 19 hours later so removed it and used another brand.
Andrewsdad97 - 10 months ago
Would get better results painting with milk. As when you open the tin and give it a good stir it resemble milk.
Never ever again 58 - 2 years ago
Perhaps I have a defective or faulty tin but this is without doubt the worst paint I have ever used. It’s like painting with milk. I could not recommend this paint to anyone. Very disappointed.
billysmum - 2 years ago
Will not use any other brand but Valspar now, as they really do the job well.
Have tried the other paints and emulsions in the range, and all give excellent coverage, go on smoothly and clean up is really easy.
Wish I hadn't used this product
Becky HH - 2 years ago
I've just finished using this product, and had a complete nightmare cleaning up after. The packaging is not helpful, advising 'brush cleaner' (?!) Also, I found this product stinks discusting, there is no need for this level of VOC's.