See more Wall & Ceiling Paint
Valspar White Matt Emulsion paint 12L
This emulsion paint is suitable for and covers 10m² per litre on average.
- The surface must be clean, dry & free of dust & grease. Glossy surfaces should be degloss before painting. Repair all damaged areas. Remove old, loose or flaky paint. Cover the surrounding area whilst decorating to provide protection against paint spills. Do not use solvent, thinners or white spirit. Do not empty into drains. Dispose of contents/container in accordance with national regulations. Do not apply in damp or humid conditions. Apply when the temperature of the surface being painted is above 10°c. Stir contents thoroughly to ensure paint is thoroughly mixed. Apply 1-2 coats using a suitable brush, roller or sprayer
Features and Benefits
At B&Q we want you to be satisfied with your colour selection. Not all monitors will display colours the same and paint tins may not show the same colour as your walls do in natural light. We therefore recommend you order a tester pot online or pop in store to pick one up so you are sure that this is the right colour for you.
- This matt, no-shine finish helps to scatter the glow of light, creating a contemporary soft look for the home
- Tintable in a machine
- Long-lasting paint that withstands the toughest scuffs & knocks in a busy family home
Health and Safety
Please note that this item has additional safety or regulatory datasheets available. The product may have possible health and safety hazards covered in these documents. Refer to the container for full information and always follow the instructions.
|Application||Brush, roller or spray|
|Litre capacity (L)||12L|
|Coverage||10m² per litre|
|Drying time||1 hour|
|Touch dry time||1 hour|
|Recoat time||2-4 hours|
|Recommended for||Ceilings & walls|
Very thin and coverage is poor
gyinnit - 6 months ago
I bought this paint to refresh a white wall, which was a good thing given how thin the consistency was and poor coverage even after 3 coats of paint. If I needed to paint over a coloured wall, this would've taken a while and double the paint. I used Dulux White previously to paint over a coloured wall and only required 2 coats, I would return to Deluxe next time.
Very poor finish
Worsened - 7 months ago
Not at all impressed with this paint, very chalky. Will not bystanders this make of paint again
Ceibergirl - 7 months ago
I was recommended this paint by a store assistant working on the paint section of my local B&Q. I painted my sons bedroom using this paint it took 4 coats to cover the walls and he now get a white powder over his cloths if he leans on them.
R051e - 8 months ago
Regret buying this paint - coverage is awful and takes a lot of coats. Avoid!
jay arts - 9 months ago
love the colours and paints
cant wait to use them again
Customers who bought this also browsed
colourcourage Contzen white Matt Emulsion paint 2.5L
This emulsion paint is suitable for ceilings walls & woodwork and covers up to 12 m² per litre on average. Durability:Excellent durability Before painting the surface must be clean, dry & free from contamination. Fill surface defects with an appropriate filler & when dry rub down until smooth. Treat ...
Dulux Brilliant white Matt Emulsion paint 2.5L
This emulsion paint is suitable for and covers 10m² per litre on average. 1 year Remove loose or flaking material. While applying Dulux easycare matt paint over existing silk finish, lightly abrade surface before painting. Make sure the surface is clean (no dirt or grease) & dry. If the surface ...
Farrow & Ball Cabbage White no.269 Matt Estate
This estate emulsion is suitable for and covers up to 35m² per 2.5 litres on average. Surface preparation:All surfaces to be painted must be sound, clean, dry & well prepared. The correct Farrow & Ball Primer & Undercoat should be used before the topcoat is applied. Stir contents well before ...
Farrow & Ball Wimborne White no.239 Matt Estate
This estate emulsion paint is suitable for and covers up to 35m² per 2.5 litres on average. Surface preparation:All surfaces to be painted must be sound, clean, dry & well prepared. The correct Farrow & Ball Primer & Undercoat should be used before the topcoat is applied. Stir contents well ...