See more Extractor fans
Vent-Axia Eclipse 100XT Bathroom Extractor fan
Keep the air inside your home clean with the use of this white Vent-Axia ABS thermoplastic extractor fan with timer. It has a 25 minute timer to ensure clean air is circulating, but not so long as to waste energy.
- Only fixings included
Features and benefits
The Eclipse range of circular axial fans is designed to be installed in kitchens and bathrooms. Its simple design provides an unobtrusive fitting that is sympathetic with most interiors.
- Wall or Ceiling mountable
- Integral back draught shutter mechanism
|Power voltage supply||240V|
|Maximum timer duration||25min|
|Power consumption in use||14W|
|Model name/number||Eclipse 100XT|
Broombasher - 1 year ago
This was bought as a replacement fan and was so simple to fit ,as a smart extra it even came with an interchangeable chrome grill very sylish
First class product.
Tango Whisky - 3 years ago
I’m no DIYer however even I managed to install this fan without any problems.
One of the best things about it is that as it’s round (compared to all others I saw which were square) I didn’t have to worry about making sure I squared the fan against the straight edge of the wall/ceiling.
The fan works a treat and is really quiet compared to my previous one.
(No title submitted)
Swoop - 8 years ago
Does what is says and is straightforward, easy to fit.
Jezamine - 8 years ago
Bought this product because it said it had a timer 'up to' 30 mins. The product overview says 1 - 30 mins which led us to believe that the timer was adjustable, it isn't. There is no timer control anywhere on the product. The one we had was quite noisy & ran for 20 mins which became very annoying especially as with 5 adults in the house as soon as it stopped someone else seemed to go into the bathroom!!! This was unavoidable as we don't have a window with the bathroom being in the middle of the house. We have now exchanged it for one which just goes on & off with the light.
Tradepaul - 9 years ago
the grill unclips to reveal 2 tiny short screws which are not captive so beware not to loose them on the floor.
the cable entry is suitable for 3 core flat cable but not for round flex as it is so narrow but deep.
The cable entry is top ONLY
The fixiing clips hold it to a rigid duct if it's cut flush, will not reach otherwise.
screw fixing is tight to the duct diameter.
Summary makes fitting harder not easier.