Village Green Wood Stain Concentrate - Water Based, Eco Friendly, Premium Quality (Midnight Blue, 500ml)

• Colouring Any Wood
• Suitable for Bare wood
• Weather-resistant
• Instructions for Use - PREPARATION: Ensure that the surface is clean, dry and free from dirt and dust and any previous finish. If sanding, the wood should be sanded with the grain, using 250 – 220 grit abrasive paper. APPLICATION: SHAKE WELL until all pigments are combined within the bottle before mixing with water at the desired ratio. Rinse out any settled pigments from the bottle into the mixture. Test the colour on an inconspicuous area first, then apply using a brush, roller, sprayer or by dipping. Allow your wood to be dry to the touch before applying additional coats. Drying time is generally 15 mins – 1 hour. Clean up with soap and water. Often 1 coat is enough, but an additional coat can give a richer finish. FINISH: For fencing / sheds etc, this stain is often sufficient enough, however if you do wish to apply a finish, allow 24-48 hours for the stain to fully dry before finishing. Depending on the application, you can finish your stained wood using a wax, oil, varnish or lacquer. ***If using our wood stain on exterior vertical timber surfaces, we would recommend using Osmo's UV Protection Oil Clear as a top coat for increased longevity*** COVERAGE: 12-15 square metres per litre of diluted stain on sanded wood (7-10 square metres on rough sawn timber)
• Guarantee - Statutory

Features and benefits

Ideal for larger areas, these bottles are packaged as a concentrate, and all you need to do is mix it with water. This saves on shipping weight and extra packaging, allowing us to pass the savings on to you whilst helping towards maintaining our environment.

Possibly the most versatile wood stain on the market, you can vary the dilution ratio of this concentrate to suit. 1 part concentrate to 9 parts water will give you a very high coverage rate from 1 bottle, making this an incredibly economical product, whereas 1 part concentrate to 4 parts water will achieve a richer, longer lasting finish.

• A concentrated wood stain to be mixed with water
• Premium quality, non-toxic, odour free
• 100% chemical solvent free and 99.8% VOC free
• Use as a standalone product or finish by sealing the stain with wax, oil, lacquer or varnish
• Coverage = 7 - 15 square metres per litre of diluted mixture, depending on the moisture content and porosity of the wood
• Available in 29 beautiful shades
• Bottle Size = 500ml, 1L & 5L
• Also available in ready to use form. See other listings