See more Wastes, Traps & Overflows

Home

Right chevron

Plumbing

Right chevron

Wirquin Extra flat waste system

£28
Loading
Checking availability...
Loading
Checking availability...

Product Details

Product Information

This extra flat waste system from Wirquin is constructed from sturdy plastic and stainless steel. Washing machine connector and 2 stainless steel basket wastes.

  • Washing machine connector and 2 stainless steel basket wastes
  • Compression

Features and Benefits

Low profile space saving waste system for 2 bowl sinks. the slimline design enables more space for storage under the sink.

  • All in one sink waste kit including washing machine adaptor
  • Suitable for 1 and a 1/2 bowls or 2 bowls
  • Stainless steel basket wastes and 300mm flexible overflow tube

Technical Specifications

BrandWirquin
MaterialPlastic & stainless steel
Colour descriptionChrome plated & white
Diameter (mm)38.1mm
Length (mm)40mm
Pack quantity1
Ease of applicationEasy
Model33100009
Product code3375537165506

Reviews

Full star
Full star
Empty star
Empty star
Empty star
2 / 5(6 reviews)

Good design let down by shoddy manufacture

Full star
Empty star
Empty star
Empty star
Empty star

ACVC - 7 months ago

As others have reported, impossible to stop it leaking. Poor quality plastic and not precise moulding mean the screw threads are inadequate. Washers are hard plastic instead of rubber, so don't seal properly. Considering the price, absolutely rubbish. Considering others were reporting these same issues SIX YEARS AGO, this indicates a company that doesn't care about quality.

Not impressed

Full star
Full star
Empty star
Empty star
Empty star

Mkgrail - 1 year ago

Tried to fit it but there's little or no adjustment available & in the process of trying broke it if you've got the exact set all welll & good

Very poor quality

Full star
Full star
Empty star
Empty star
Empty star

Minners - 2 years ago

Recently bought this item from B and Q
Good design but very poor quality
Fittings so thin they are almost transparent
Already had to remove and redo the joints
You only need to touch the item and it starts to leak
Will probably have to replace it in the near future

Works great, with some modding

Full star
Full star
Full star
Full star
Empty star

Fluxboxuk - 2 years ago

Not sure what these other chaps or their plumbers were doing, but i fitted this to my new sink a few weeks back, and its working perfect, no leaks and no fuss. I did have to get a small extension piece to allow for the different depths of the main sink and the small one, but it was a scrap piece of solvent pipe i had lying around, not much trouble.

Ill be honest and say i did buy the one which was just the waste part to begin with and this did leak like crazy, i couldnt get it to screw on tight to the bottom of the sinkhole pieces, the thread seemed to be slightly too large, but then i went back and got the one which came with the wirquin ones, and it fitted perfect. Iv been using this now for around 2 weeks, Zero Leaks, Zero problems at all.

One criticism is the lack of the following;
- Extension piece to raise secondary sink hole, as said would be nice if they accounted for this
- Would have liked a proper plug for the end of the trap, instead of the washing machine push on connector, i fitted my own screw on cap to save space (didnt have space to the right to have that thing sticking out).

Hmmm....

Full star
Full star
Empty star
Empty star
Empty star

MDT1 - 5 years ago

Where to start? it is expensive. Massive issue with the trap - it leaks! It also doesn't take into account that my 0.5 sink base is not on the same level as the main sink....

Worst still, the telescopic part of the kit is about 1.5 cm too short for about 50% of 1.5 sinks.

I do like the low profile... the theory is fantastic... but please, please, please don't buy it - you could spend another £50 (like me) trying to get it watertight!

  1. Show all customer reviewsRight chevron