WRX Trade Wood Primer & Undercoat 5Lt.

• Guarantee - 1 year

Features and benefits

• Satinwood Paint Water-based, acrylic emulsion based, semi gloss, covering and protecting topcoat satinwood paint. Ideal for panel doors and all sorts of wooden surfaces.
• PREPARATION The surfaces should be dry and free of any dirt, dust, oil, old paint residues and loose textures which cannot hold itself. It is recommended that wood stain be used on the raw surfaces to be painted for the first time. First, the surface should be sanded lightly and wiped with a damp cloth to remove any dust prior to painting. Best result can be achieved by applying the paint with a brush along the grain of the wood. All tools used should be cleaned with water.
• SPECIFICATIONS Perfect adhesion to all kinds of wooden surfaces with high level of hiding power. Free of cracking, swelling and peeling. It shows the natural texture of the wood. Contains no disturbing odour as it is water-based. Lead-free. Resistant to water, household chemicals and shocks. Non-yellowing paint
• APPLICATION Do not apply in damp or humid conditions or room temperatures below 10°C. Stir well before use. Ready to use. Mixing ratio for thinning is 5% maximum, if required. Suitable for application by brush or roller. For best results, load the brush generously. Apply paint evenly and avoid overspreading. 2 coats are recommended. Extra coats may be required if the colour change is strong.
• COVERAGE WRX Door&Trim will cover approximately 14-18 square metres per litre depending on the surface.
• DRYING TIME Touch dry in an hour under normal conditions. Allow 6 hours between coats. Through dry is 24 hours.
• AFTER PAINTING Remove as much paint as possible from brushes and rollers, before cleaning with warm soapy water. Do not empty paint into drains or watercourses. Some local authorities have special facilities for the disposal of waste paint. Replace lid firmly.
• STORAGE Store and move in dry conditions in a secure upright position. Protect from frost and extreme temperatures. Health & Safety Information Keep out of reach of children. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Avoid release to the environment. Inhalation: Remove to fresh air. In case of persistent complaints obtain medical attention. Ingestion: Do not induce vomiting. Immediately obtain medical attention. Skin contact: Remove contaminated clothing. Clean the skin with water, soap and special cleaning cream. Eye contact: Flush eye with copious quantities of water. If irritation occurs, obtain medical attention. Contains mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (Cas No:55965-84-9) May produce an allergic reaction. VOC EU limit value for this product (cat.A/d) : 130 g/l (2010). This products contains max 30 g/l VOC. VOCs. (Volatile Organic Compounds) contribute to atmospheric pollution.