A heavy duty bench lathe with a big capacity and plenty of power. With full cast iron construction this bench lathe is 40% heavier and more stable than your average bench lathe. Using a large 1hp motor allows the electronics to achieve a lowest speed of only 250rpm, with enough torque to be useful. The actual spindle speed is shown on a clear digital display. The tool rest and tailstock both slide smoothly along the bed and are securely locked with a large cam action lever. The tool rest itself is a hardened round steel bar. Supplied with drive centre, tail centre, 100mm diameter face plate, knock out bar, adjustable rubber feet, 1.9m power cable and UK 3 pin plug. *** Charnwood 1420V Specification: Max. spindle length (without centres) 500mm (20″), Max. spindle length (with centres fitted) 430mm (17″), Distance over bed (Max. bowl diameter) 350mm (14″), Distance over tool rest (Max. spindle diameter) 250mm (10″), Tool rest length 150mm (6″), Tool rest stem diameter 25mm, Motor (DC carbon brush) 750w (1hp) 240v, Speed range 250 – 3550rpm, Spindle thread size M33 x 3.5 (Din800), Spindle tapers MT2, No. of indexing positions 24 (every 15 degrees), Hollow headstock diameter 10mm, Hollow tailstock diameter 8mm, Dimensions (WxDxH) 950mm x 370mm x 500mm, Weight 57kg, Assembly Time Required 10 Minutes, Product Guarantee 5 Years.